PRODUCT CATEGORIES
MIG WELDING
MIG WELDING is generally suitable for welding high alloy steels like alluminium, copper, nickel and also special metals like titanium and other non-ferrous metals. To achieve the best results, metals like aluminum go through MIG pulse light arc process for welding. We provide dirrerent kind of Torches, Spare Parts and Consumable Parts when it comes to MIG WELDING.
TIG WELDING
TIG WELDING is highly used for welding austenitic Steel because of its suitable viscocity due to which the upper beats are very smooth and the lower beats sides of root are flat. Steel, Copper, Nickel and Titanium are generally used for TIG WELDING as these are permanantly sustainable weldings. We provide dirrerent kind of Torches, Spare Parts and Consumable Parts when it comes to TIG WELDING.
LASER WELDING
Laser welding is a high-precision, high-speed welding technique that uses a concentrated laser beam as a heat source to join metal or thermoplastic pieces. The process is highly automated and relies on advanced optics to focus the laser beam precisely on the joint, producing deep, narrow, and high-quality welds with minimal heat distortion.
LASER CUTTING
LASER CUTTING is a technology in which a laser is usLed to vaporise materials and provide a cutting edge. When cutting mild steel, the heat of the laser beam is enough to start a typical “oxy-fuel” burning process, and the laser cutting gas will be pure oxygen, just like an oxy-fuel torch. When cutting stainless steel or aluminum, the laser beam simply melts the material, and high pressure nitrogen is used to blow the molten metal out of the kerf. We provide different kind of Heads, Spare Parts & Consumable Parts when it comes to LASER CUTTING.
PLASMA CUTTING
PLASMA CUTTING is generally done on all electically conductive metals such as Stainless Steel, Structural Steel, Cast Iron, Aluminum, Copper and Brass. Both Active and Inerit gases become a part of this process, a mixture of these with compressed air are sued as cutting gases. We provide dirrerent kind of Torches, Spare Parts and Consumable Parts when it comes to PLASMA CUTTING.
OXY-FUEL CUTTING
OXY-FUEL CUTTING is a thermal cutting process in which oxygen and fuel gas is used to cutting through materials. Oxyfuel process is most widely used in industries for thermal cutting process as it can easily cut from a thickness of 0.5mm to 0.250mm. The equipment cost is low and can be used manually or mechanised as well. We provide dirrerent kind of Torches, Nozzels and Spare Parts when it comes to OXY-FUEL CUTTING.
GAS PRODUCT
For gas welding and cutting, the core equipment uses oxygen and a fuel gas like acetylene, stored in separate high-pressure cylinders and mounted on a cart for mobility. Pressure regulators on each cylinder control the gas flow into color-coded hoses, with safety flashback arrestors preventing flame from entering the cylinders. A handheld torch mixes the gases and is fitted with different tips for specific tasks, such as a welding tip for joining metal or a cutting tip with an extra oxygen lever for slicing through thick steel. Supporting accessories include strikers for ignition, filler rods for welding, clamps for holding workpieces, and specialized personal protective equipment (PPE), like tinted goggles, gloves, and flame-resistant clothing, to ensure safety.
WE ARE COMPETENT IN WELDING & CUTTING PRODUCTS
At Milani Weldcut Technologies we provide our customers the best quality products at most reasonable price.